Product Description

Wattage	High — 1300W / Low — 650W (2 levels of heating)
Voltage	120V 60Hz
Material	One-piece log/stone and plastic crystals
Installation	Wall-mounted and built-in
Timer	1-9 hours
Control Mode	Touch Panel / Remote Control
Flame Colours	10 colours (9 colours + cycle)
Flame Brightness	1 level (Brightness cannot be adjusted)
Overheat Protection	Yes
Heating Area	16-20m²

Installation

Reinstall the glass panel onto the firebox with screws.
Remove the outer glass around the bracket, mounting screws
Remove the outer glass
Take out the foam
Install the outer glass to the appliance:
Lift glass panel and line up with the top bracket, fasten the panel to the appliance.
Screw the brackets to the appliance with mounting screws
Be cautious about the outer glass bracket screws

To remove the outer glass around the bracket, undo the mounting screws
Remove the outer glass
Adjust the screws and carefully take out the log set
Gently put the glass crystals into place
Be cautious about the outer glass bracket screws
Integrated remote control and touch control pad
Has 3 ember bed selections which plastic crystals, one-piece log/stone consist
Automatic overheating protection with a timer of 1 hour increments up to 9 hours
Two-stage fan-forced air heater which you may use with the heater or without for ambiance
Includes LED 9 color flame, one color cycle, and one-off status and the same applies to the side lighting